The catalog: PlastiXrevolution

Upper vise blocks

For flat top uppers. The block goes under the receiver, the rail cap goes on top, and the vise clamps the pair.

Which upper block? See the chart

Flat top upper	Listed for a vise that opens
Flat top upper	3 in.	3.5 in.	4 in.
AR-15 flat tops	Basic$23.99 each	Standard$26.99 each	HeavyDuty$37.99 each
AR-10 type flat tops	None listed	Standard$30.99 each.308 ARs, SR-25, LR308, AR-10	HeavyDuty$36.99 eachMost .308 ARs
Both AR-10 and AR-15 type flat tops	None listed	Multi-Cal$34.99 each	None listed

Changing a stubborn barrel? The HeavyDuty design helps remove stubborn barrels, and it comes with 2 clear anti torque plates. Standard and Multi-Cal blocks come with steel pins and clips, for light duty holding.

“None listed” means we don’t list a block at that opening, not that one won’t fit. Not sure? Call the shop: (408) 226-6672

Multi-Cal block clamped in a blue bench vise, holding a 223 upper with the barrel installed

Part no. 223308PUVB

Best seller

Multi-Cal Upper Receiver Vise Block

Both AR-10 and AR-15 type flat tops. Vises that open 3.5 in.

Part no. 223308PUVB

2 steel pins and clips, for light duty holding.

$34.99 each

Standard block and rail cap holding an AR-15 upper in a bench vise

Part no. PIN UPPER BLK

AR-15 Standard Upper Receiver Vise Block

AR-15 flat tops. Vises that open 3.5 in.

Part no. PIN UPPER BLK

Steel pins and clips included. For a stubborn barrel, see HeavyDuty.

$26.99 each

HeavyDuty block with clear plates holding an AR-15 upper in a bench vise

Part no. DELUXE UPPER BLK

AR-15 HeavyDuty Upper Receiver Vise Block

AR-15 flat tops. Vises that open 4 in.

Part no. DELUXE UPPER BLK

Heavy duty design helps remove stubborn barrels. The clear pieces are 2 anti torque plates.

$37.99 each

Basic block holding an AR-15 upper in a blue bench vise

Part no. 223BasicUpper

AR-15 Basic Upper Receiver Vise Block

AR-15 flat tops. Vises that open 3 in.

Part no. 223BasicUpper

Block and rail cap, for barrel work. For a stubborn barrel, see HeavyDuty.

$23.99 each

AR-10 Standard block holding a .308 upper in a blue bench vise

Part no. 308PUVB

AR-10 Standard Upper Receiver Vise Block

.308 ARs, SR-25, LR308, AR-10. Flat tops. Vises that open 3.5 in.

Part no. 308PUVB

2 steel pins and clips, for light duty holding.

$30.99 each

AR-10 HeavyDuty block and rail cap between two clear plates

Part no. 308URVB

AR-10 HeavyDuty Upper Receiver Vise Block

Most .308 ARs. Flat tops. Vises that open 4 in.

Part no. 308URVB

Heavy duty design helps remove stubborn barrels. The clear pieces are 2 anti torque plates.

$36.99 each

Lower vise blocks

Goes through the top or bottom of the magazine well. Works with the upper installed or removed.

AR-15 lower block in black polymer with NO-MAR cut into the catch

Part no. 223 BLK LOWER

AR-15 Lower Receiver Vise Block

Any AR-15 lower. Goes through the magazine well and locks the receiver in any position.

Part no. 223 BLK LOWER

$20.99 each

Lower block standing in a blue bench vise with a stripped .308 lower receiver on top

Part no. LR308 LOWER

SR-25 AR-10A Lower Receiver Vise Block

SR-25 and LR308 (DPMS type) lowers.

Part no. LR308 LOWER

$25.99 each

Soft jaws

Polymer pads for barrels, round stock and rails. Not tied to one rifle.

Black magnetic soft jaw pads on a blue bench vise, gripping a threaded barrel

Part no. VMAG4SOFT

4 in. Magnetic V Groove Soft Jaw Pad

Barrels and round stock. 3 in. to 6 in. vises.

Part no. VMAG4SOFT

Light to medium duty holding. Magnets keep it on the jaws.

$20.99

Part no. BLK-U4SVJ

4 in. Universal V Groove Barrel Vise Blocks

Barrels and round stock. Any 4 in. vise.

Part no. BLK-U4SVJ

Light to medium duty barrel holding.

$18.99

Rail clamp soft jaw gripping the top rail of an upper, seen end-on above a blue bench vise

Part no. PRVC

Pic / Weaver Rail Vise Clamp Soft Jaws

Holds rails and receivers. Aligns handguards to the receiver rail.

Part no. PRVC

$26.99

Armorer’s tools

Small tools for cleaning, trigger work and 1911 bushings.

Black cleaning link pinned between the rear of an AR-15 upper and lower

Part no. 223 BLK CLINK

AR-15 Cleaning Link

Holds receiver halves open for cleaning.

Part no. 223 BLK CLINK

$17.99 each

Part no. 308CLINK

AR-10 Cleaning Link

Holds .308 receiver halves open for cleaning.

Part no. 308CLINK

$17.99 each

Black L-shaped trigger testing block on white

Part no. 223BLKTRIGGER

AR-15 Trigger Testing Buffer Block

Repeat dry-fire trigger testing. Fits the front pivot pin.

Part no. 223BLKTRIGGER

$17.99 each

Black curved trigger test fixture on white

Part no. 308 TRIGGER

AR-10 Trigger Test Fixture

Repeat dry-fire trigger testing. Fits both pivot pins.

Part no. 308 TRIGGER

$23.99 each

Clear bushing wrench fitted on the muzzle end of a 1911 slide

Part no. 1911 mini wrench web

1911 Barrel Bushing Wrench

Clear, so you can see the bushing cap. Pocket size.

Part no. 1911 mini wrench web

$5.99 each

Pistol stands

Clear acrylic, CNC cut and hand polished.

Blue training pistol resting on a clear acrylic stand

Part no. 1911 stand

1911 Clear Acrylic Pistol Stand

Clear acrylic, CNC cut and hand polished. Hex wrench for assembly included.

Part no. 1911 stand

$23.99 each

Kits

Blocks sold together. The price is for the whole set.

Multi-Cal upper block, rail cap and two lower blocks laid out in black polymer

Part no. MulticalUP/LO2

Multi-Cal Upper and Lower Vise Block Set

Multi-Cal upper for AR-10 and AR-15 type flat tops, vises that open 3.5 in. AR-15 lower block, and a 308 lower block that only fits AR-10A LR/SR series.

Part no. MulticalUP/LO2

3 pieces: one upper block and two lower blocks.

$64.99 set of 3